Download Print this page

Cen-Tec QuietDrive CT-10 Response Manual

Download this manual

Enlarged version

LIMITED WARRANTY

Subject to the conditions and exceptions stated in this

warranty Cen-Tec Systems warrants the products sold by

Cen-Tec Systems to be free from defects in materials and

workmanship under normal residential use and service for

one (1) year from the date of delivery on presentation of the

original contract or invoice. A copy of the original bill of sale

must accompany all warranty requests. If one is not produced

as required the manufactures date code will be used.

CONTACT INFORMATION

1807 Morrissey Drive

Bloomington, Illinois 61704

PHONE: (309) 664-0328

TOLL FREE: (800) 833-2822

FAX: (309 663-8766

EMAIL: help@centecsystems.com

WEBSITE: www.centecsystems.com

www.centeccommercial.com

F51088

™

CT-10 Response Manual

Need help?

Do you have a question about the QuietDrive CT-10 Response and is the answer not in the manual?

Page 1 Subject to the conditions and exceptions stated in this warranty Cen-Tec Systems warrants the products sold by Cen-Tec Systems to be free from defects in materials and workmanship under normal residential use and service for one (1) year from the date of delivery on presentation of the original contract or invoice.
Page 2 Cen-Tec CT-10 00 Safety instructions Electric Brush Parts Explosion List Electric shock could WARNING occur if used out doors or on wet surfaces. Please read all instructions before using this Electric Powerhead. Save these instructions. INTENDED FOR HOUSEHOLD USE ONLY.
Page 3 Cen-Tec CT-10 00 Vacuuming tips Electric Brush Parts Explosion Suggested Sweeping Pattern Powerhead Steering For best cleaning action, the The nozzle swivel rotates left and powerhead should be pushed right for improved maneuvering in straight away from you and pulled tight spaces and around corners.
Page 4 Belt & Agitator Changing/Replacement Agitator Cleaning To Replace Agitator To Replace Belts To Clean Agitator 8) Carefully lift up the axel holding the belts and remove 1) Turn the nozzle upside down 5) Remove the five screws NOTE: In order to keep cleaning the axel and agitator belt.