TP-Link TL-PA7020 Quick Installation Manual page 5

If you have more than 2 powerline devices, repeat the steps below on each additional
devices to be configured:
1 Press the Pair button for 1
second on any powerline
device in the secure network.
Secure Network
A
Blinking
FAQ (Frequently Asked Questions)
Q1. How do I reset my powerline adapter?
A1. With the powerline adapter plugged into to the electrical outlet, press and hold the
Pair button for more than 15 seconds until the Power LED
and comes back on.
A2. Use the tpPLC Utility to reset the powerline adapter.
2 Within 2 minutes, press the
Pair button for 1 second on the
additional powerline device.
B
Blinking
English
3 Done.
C
goes off momentarily
On
3