Table of Contents
Advertisement
Audio and Telematics
QUESTION
The CD is ejected
automatically or is not
played by the player.
The CD player sound is
poor.
The Bluetooth connection
is cut.
The message "USB device
error" is displayed on the
screen.
A telephone connects
automatically,
disconnecting another
telephone.
312
ANSWER
The CD is inserted upside down, is unplayable, does not contain
any audio data or contains an audio format which the player cannot
play.
The CD is protected by an anti-pirating protection system which is
not recognised by the audio equipment.
The CD used is scratched or of poor quality.
The audio settings (bass, treble, ambience) are unsuitable.
The battery of the peripheral may not be sufficiently charged.
The USB memory stick is not recognised.
Automatic connection overrides manual connection.
SOLUTION
-
Check that the CD is inserted in the player
the right way up.
-
Check the condition of the CD: the CD
cannot be played if it is too damaged.
-
Check the content in the case of a recorded
CD: consult the advice in the "Audio" section.
-
The audio equipment's CD player does not
play DVDs.
-
Due to their quality level, certain writeable
CDs will not be played by the audio system.
Insert good quality CDs and store them in
suitable conditions.
Set the treble or bass level to 0, without selecting
an ambience.
Recharge the battery of the peripheral device.
Use only USB memory sticks formatted to FAT 32
(28-bit file allocation table).
Modify the telephone settings to remove
automatic connection.
Hide quick links:
Advertisement
Table of Contents
