Progressive - Turning On/Off; Picture Setting - Philips DVP3005K/74 User Manual

Progressive - turning on/off

In the progressive scan mode, you can
enjoy the high quality picture with less
flickers. It only works when you have
connected the DVD player's Y Pb Pr jacks
to your TV that supports the progressive
video input. Otherwise, the a distorted
picture will appear on the TV. For proper
progressive scan set up, see page 16.
1
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {PROGRESSIVE}, then press 2.
OFF
To disable Progressive Scan function.
ON
To enable Progressive Scan function.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
➜
Follow the instructions shown on the
TV to confirm the selection (if any).
➜
If a distorted picture appears on the TV
screen, wait for 15 seconds for auto
recovery.

Picture Setting

This DVD Player provides three
predefined sets of picture colour settings
and one personal setting which you can
define yourself.
1
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {PICTURE SETTING}, then press
2.
STANDARD
Select this for standard picture setting.
BRIGHT
Select this will make the TV picture
brighter.
SOFT
Select this will make the TV picture softer.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
01-37 DVP3005K_751
DVD Setup Menu Options
PERSONAL
Select this to personalise your picture
colour by adjusting the brightness,
contrast, tint and colour (saturation).
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
3
If you select {PERSONAL}, then proceed
to steps
➜
The 'PERSONAL PICTURE SETUP'
menu appears.
4
Press 3 4 to highlight one of the
following options.
BRIGHTNESS
Increase the value will brighten the
picture or vice versa. Choose zero (0) for
average setting.
CONTRAST
Increase the value will sharpen the picture
or vice versa. Choose zero (0) to balance
the contrast.
TINT
Increase the value will darken the picture
or vice versa. Choose zero (0) for
average setting.
COLOUR
Increase the value will enhance the colour
in your picture or vice versa. Choose zero
(0) to balance the colour.
5
Press 1 2 to adjust the setting that best
suit your personal preference.
6
Repeat steps
colour features.
7
Press OK to confirm.
SYSTEM MENU
31
4 7
~ .
4 5
~ for adjusting other
.
3139 246 15761
15/06/05, 4:43 PM
31