Wi Digital Systems JM-WALUi Quick Start User Manual page 10

Pairing
Before using the Wi AudioLink Ui, you will
need to pair the transmitter(s) with the Wi
AudioLink Ui receiver (Rx).
1. First turn ON the receiver (Rx) by pressing
and holding the POWER button on the
receiver
2. Press and hold the LINK button
transmitter for 3 seconds. The Power/Status
green LED
flashing fast. The transmitter is now in a
Pairing mode and ready to search for the
receiver (Rx).
3. Press and hold the LINK button
receiver (Rx) for 3 seconds. The green
Power/Status LED
start flashing fast. The receiver is now in a
Pairing mode and ready to be found by the
transmitter.
4. Once the transmitter pairs with the receiver,
the Power/Status LED on both devices will
turn to solid Green. Now you are
Wi USB AudioLink Transmitter
1. USB Port
2. Link Button
3. Power/
Status LED
u
for two seconds.
l
on the transmitter will start
w
k
k
v
on the receiver will
l j
on the
on the