PEUGEOT 108 Handbook page 92

Driving
Switching on
F Press the end of the control stalk: the
speed limiter is switched on.
t his indicator lamp comes on in the
instrument panel.
F Accelerate or decelerate to attain the
desired speed.
F Push the control stalk down and release, to
programme the speed.
t he speed at which the vehicle is running
at the moment when you release the
control stalk becomes the programmed
speed.
90
Downloaded from www.Manualslib.com
Pause
F You can temporarily stop the the speed
limiter by pulling the control stalk towards
you.
F Push the control stalk up to restore
operation of the speed limiter with the
same speed setting.
manuals search engine
Adjusting the speed limit
setting
Once a speed is programmed, you can modify
it by pushing and releasing the control stalk:
- up to increase the speed setting,
- down to reduce the speed setting.
A brief push on the control stalk modifies the
speed setting by + or - 1 km/h.
A maintained push on the control stalk modifies
the speed setting by + or - 5 km/h.