PEUGEOT 108 Handbook page 140

Practical information
F Check that the compressor switch is at the
"O" position).
F u ncoil fully the electric cable, stowed under
the compressor.
F Connect compressor's plug to the vehicle's
12 V socket.
F Switch on the ignition.
138
Downloaded from www.Manualslib.com
F Start the compressor by placing the switch
at the "I" position and leave it running until
the tyre pressure reaches 2.0 bar.
t he sealant product is injected into the tyre
under pressure; do not disconnect the pipe
from the valve during this operation (risk of
splashing and stains).
manuals search engine
If after around 5 to 7 minutes the
pressure is not attained, this indicates
that the tyre is not repairable; contact
a Pe uge Ot dealer or a qualified
workshop for assistance.
t ake care, the sealant product
is harmful (e.g. ethylene-glycol,
colophony...) if swallowed and causes
irritation to the eyes.
Keep this product out of the reach of
children.
t he use-by date is marked on the
cartridge.
After use, do not discard the
cartridge by the roadside, take it to a
Pe uge Ot dealer or an authorised
waste disposal site.
Don't forget to obtain a new sealant
cartridge, available from a Pe uge Ot
dealer or a qualified workshop.