Tools Required; Typical Systems - Raymarine Quantum Radome Installation Instructions Manual

3.5 Tools required

Product installation requires the following tools:
Item number Description
1 Power drill
2 3 mm drill bit
3 10 mm drill bit
4 Adhesive tape
5
13 mm socket
6 Torque wrench
18

3.6 Typical systems

Note: The following illustrations show the various
products that can be connected in a typical system.
These systems are shown as an example only and
may differ from your planned installation.
• For information on how to connect the products,
refer to the relevant Cables and connections
section for your Quantum variant.
• For information on available cables and
accessories, refer to the
accessories
Example: basic Radar system (wired data
connection)
Quantity
1
1
1
1
1
1
Note: This example is NOT applicable to the
Wi-Fi-only Quantum
Item
1
2
3
Example: basic Radar system (wireless data
connection)
Item
1
2
3
Chapter 11 Spares and
section.
™ variant.
Description
Multifunction display
Quantum ™ Radome
RayNet data cable
Description
Multifunction display
Quantum ™ Radome
Wi-Fi datalink