Device power-up delay
Maximum time the device will take before it properly reports itself to the
Host Controller. 'Auto' uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken from Hub descriptor.
Chipset Settings
This section allows you to configure and improve your system and
allows you to set up some system features according to your preference.
Aptio Setup Utility – Copyright © 2016 American Megatrends, Inc.
Advanced
Main
►
System Agent (SA) Configuration
►
PCH-IO Configuration
System Agent (SA) Configuration
Aptio Setup Utility – Copyright © 2016 American Megatrends, Inc.
Main
Advanced
System Agent Bridge Name
System Agent RC Version
VT-d Capability
VT-d
eDRAM Mode
► Graphics Configuration
VT-d
VT-d capability.
eDRAM Mode
SW Mode eDRAM on or eDRAM off.
Chipset
Boot
Chipset
Boot
Skylake
1.6.0.0
Supported
[Enabled]
[eDRam HW Mode]
IB915 User's Manual
DRIVERS INSTALLATION
Security
Save & Exit
Security
Save & Exit
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+-
Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save
ESC: Exit
39