IOGear GUWAVKIT4 User Manual page 13

C: The UWB Connection Manager display window will show the GUWAVKIT4(s) on the
Devices tab as Not Connected. Simply click on the Connect tab to establish a connection.
It will take approximately 15 seconds for the Drivers to load upon first connection. When
the wireless connection has been made, a yellow star will automatically appear next to the
GUWAVKIT4 Icon, making it the default device for future connections. If the external monitor
connected to the Receiver Base shows only the wallpaper background of my Windows®
desktop, please refer to Page.15 to set the display mode to Mirror Mode.
D: Disconnecting the GUWAVKIT4 from your computer - On the Devices tab of the UWB
Connection Manager, right click on the connected GUWAVKIT4 and unselect "Set as Default".
Once the device is no longer the default device, you can then either, a) double click on the
device, or, b) right-click and select "Disconnect". The device will now move back to the "Not
Connected" status.
F: Renaming the GUWAVKIT4 - You can change the name of the each GUWAVKIT4 listed
on the Devices tab of the UWB Connection Manager. This is especially useful if you have
multiple GUWAVKIT4s to differentiate. To rename a GUWAVKIT4, right-click on the default
name, select Rename from the shortcut menu, and then enter a custom name.
tab of the Wireless USB Manager. This is especially useful if you have multiple IOGEAR-
GUWAVKIT4s, to differentiate between them. To rename an IOGEAR-GUWAVKIT4, right-click
on the default name, select Rename from the shortcut menu, and then enter a custom name.
13