Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Timeguard EMU56
Summary of Contents for Timeguard EMU56
- Page 1 24 Hour & 7 Day Electronic OEM Time Control Module Model: EMU56...
-
Page 2: General Information
1. General Information These instructions should be read carefully and retained for further reference and maintenance. 2. Safety • Before installation or maintenance, ensure the 1.4 – 1.6 Volt DC supply to the time controller is switched off. • It is recommended that a qualified electrician is consulted or used for the installation of this time module and install in accordance with the current IEE wiring and Building... - Page 3 PNP outlet suitable for sourcing up to 0.25mA from the 1.5V supply when in the ON state. • The EMU56 is designed for use with the PB04 power board which is operated from 220-240V AC mains, provides a relay output...
-
Page 4: Connecting Diagram
5. Connecting Diagram Diagram 1... - Page 5 6. Programming • Five setting buttons are provided; the Set button is used to sequence the module in programming mode. The Day, Hrs and Mins buttons are used to set the days, hours and minutes as required. Please see diagram 2 for reference. 24 hour digital Day indicator Output status...
-
Page 6: Setting The Clock
6.1 Setting the Clock NOTE: Pauses of 15 seconds or more during programming will result in automatic return to the main operating screen. 1. To prepare the module for programming clear the memory by pressing both the Set and Day buttons simultaneously until the display disappears. -
Page 7: Setting The Programmes
6.2 Setting the Programmes NOTE: Pauses of 15 seconds or more during programming will result in automatic return to the main operating screen. 1. Press the Set button and hold it down for about 3 seconds until the display shows with a flashing “1”... - Page 8 5. Press the Set button briefly and the display shows and the programme 2 “ON” time can be entered as for programme 1. If no additional programmes are required all other programmes should be left blank. You can also omit by not programming any ON/OFF times on the day you require no switchings.
- Page 9 5. The required programmes can now be set for day 2 in the same way as for day 1. Days 3 to 7 can be programmed in the same way as for days 1 and 2. 6. Once the programming is complete press the Set button for about 3 seconds until the display returns to the current time of day with the colon flashing.
- Page 10 been suspended until reinstatement by the user. There is no limit to the number of programmes you can suspend. 5. To reinstate a suspended programme return to either the “ON” or “OFF” time of the programme which has been suspended and cancel the black “X”...
-
Page 11: Year Guarantee
020 8450 0515. Note: A proof of purchase is required in all cases. For all eligible replacements (where agreed by Timeguard) the customer is responsible for all shipping/postage charges outside of the UK. All shipping costs are to be paid in advance... - Page 12 If you experience problems, do not immediately return the unit to the store. Telephone the Timeguard Customer Helpline; HELPLINE 020 8450 0515 or email helpline @ timeguard.com Qualified Customer Support Co-ordinators will be on-line to assist in resolving your query.
Need help?
Do you have a question about the EMU56 and is the answer not in the manual?
Questions and answers