Use And Operation - Honeywell MF08 Series User Manual

Hide thumbs Also See for MF08 Series:
Table of Contents

Advertisement

INSTALLATION (CONTINUED)
IMPORTANT:
• Do not replace or lengthen the exhaust hose as this could cause the unit to malfunction.
NOT RECOMMENDED
WARNING: Any warranties included with this product will be voided if an extra extension hose is added
to the originally provided installation kit or if the installation is performed differently than the manufactur-
er's instructions, without proper consultation. Please contact Customer Support for help with installation
procedures if needed.
The supplied exhaust hose has a diameter of 5 inches (12.7cm) and can be extended from 12 inches
to 47 inches (30cm to 120cm).
Do not bend (to the extent shown below) the exhaust hose. A bent hose will block exhaust air and
cause the unit to malfunction or shut-off.
Make sure the back of the unit is at least 50 cm / 20 inches away from the wall. Do not place the unit
in front of curtains or drapes as this could obstruct the airflow.
USE & OPERATION
TOUCH SCREEN CONTROL PANEL
Temperature and Time Setting Indicator Display
(1)
Timer Control
(4)
Mode Control
POWER CONTROL
The Power Control turns the unit on and off. When the unit is plugged in, this button lights up indicating
it is in a Standby Mode ready to be switched on anytime.
(2)
Fan Speed Control
(5)
Power Control / Standby Mode
Mode Indicator Light
EN
RECOMMENDED
Power Control
4
50 cm / 20"
Receiving Sensor
(3)
Timer / Temperature Set Controls
(6)
Warning Light (when flashing)
Warning Light

Advertisement

Table of Contents
loading

Table of Contents