Table of Contents
Advertisement
2 Interfaces
2.1 Wired Interfaces
The Hera600 Series products have four 10 / 100 Mb/s Ethernet connectors, these can be used to
connect to other devices such as computers, video cameras and sensors. Each port is autosensing
so either a straight or crossover CAT5 cable can be used.
These ports can be enabled to act as either an Ethernet switch or a VLAN switch. When using an
Ethernet switch all the ports are effectively tied together internally. When using a VLAN switching,
each port may be allocated a specific function such as a De-Militarised Zone (DMZ) uplink to an
external WAN interface (e.g. DSL, satellite, fibre, etc).
Some Hera600 Series products may support serial connections for connection to industrial equipment
and legacy devices. Further use cases and how to implement this function are found in other
documents.
2.2 Wireless Interfaces
Hera600 Series products can be specified with a Wireless LAN (WLAN) capability to allow computers
and telemetry devices to be wirelessly connected.
The wireless capability depends on the product within the Hera 600 series.
2.2.1 Hera 604 Wireless Interfaces
802.11a upto 54Mbps
802.11b upto 11Mbps
802.11g upto 54Mbps
802.11n upto 300Mbps
2.4Ghz & 5Ghz Non Concurrent
2.3 Mobile Interfaces
Hera600 Series products support a wide range of 2G/3G/4G/LTE cellular options. The following
displays the current specifications of the products.
2.4 Physical Ports Connections
There are various connectors for different services and the type and quantity will vary depending on
the product supplied to you.
Below are diagrams of the front and back of the HERA 604 router, a three SIM router (the third SIM is
an embedded SIM).
Eseye | + 44 1483 802501 | +1 512-813-0599 | +27 87 551 8200 | +33 9 87 67 53 36 | +61 8 9551 5200
Eseye, AnyNet and Eseye Logos are registered trademarks of Eseye Ltd © Eseye 2017 Limited. All Rights Reserved
enquiries@eseye.com | eseye.com
Page 7
Hide quick links:
Advertisement
Table of Contents
