Signal Connections - QUAD 77 Instruction Book

SIGNAL CONNECTIONS
Note
Source 1
Source 2
Tape
In special cases where the loudspeakers also resdre an anergising supply
follow the instructions for the loudspeakers.
Each loudspeaker should be capable of handling the fr.il otlpltt of the amplifier.
The outputs must not be connected in parallel or h setbs to produce a single
channel amplifier.
Take care if heavier than normal grade loudspeabc&les are used as these
can place undue strain on the output terminals-
All input connections are clearly marked on ihe bad( d the amplifier. Phono
sockets are used for non 77 equipment inputs and olputs.
Auxiliary input for non Quad 77 equipment srcfi as Hwision tuner, video
recorder etc. The signal cable should be connecf;ed b the source 1 L and R
sockets,
A second auxiliary input for non Quad 77 equipment The s@nal cable should
be connected to the source 2 L and R sockets.
Record and playback connections for tape or cass€ffie recorders. Record and
replay levels have been chosen to match most recorders atnently available.
The signal playback cable should be connected to the tape in L and R sockets
and the record cable to the tape out L and R sockeds. Otr tape monitoring is
provided from these sockets.
page 5