Panasonic DMR-EH75VP Service Manual page 37

Tape Type
60 min. or less type (Large Hub)
90 min. or over type (Small Hub)
l "A" and "E" is hexadecimal. "A" =10 (Decimal), "E" =14 (Decimal).
l Hexadecimal indication from "A" to "E" are shown below.
Note 3: Supplementary Data 2 (Reason of Ejection)
Supplementary Data 2
1
2
3
4
The Tape position is divided into 6 stages between the Tape beginning
edge: "A " and the Tape end edge: "5".
The Tape position is divided into 14 stages between the Tape
beginning edge: "E " and the Tape end edge: "1".
S-reel pulse is less than 3 when the loading has been completed.
(Miss catching the tape)
Pulse Timer over during the short rewind at the DOWN position.
(Error of S-photo sensor system, S-reel system, Capstan system)
Mechanism lock from the DOWN position to the LOAD position during the loading.
Both ends have been detected at the LOAD position when the loading is started.
37
The aim of Tape position between the starting edge and the finishing
Reason
edge
DMR-EH75VP