Philips 8FF3WMI User Manual page 12

»
If wireless network setup is successful,
a confi rmation message is displayed.
3
Press OK to confi rm.
• Check whether a valid IP address
is assigned to the PhotoFrame
(see 'View system status of the
PhotoFrame' on page 42).
4
Share PC photos for wireless display (see
'Share PC/Mac photos for wireless display'
on page 15).
• Display Internet photos on the
PhotoFrame (see 'Display Internet photos'
on page 21).
Tip
•
You can set up wireless connection between one
PhotoFrame and the router at a time. If you want to set
up wireless connection between another PhotoFrame
to the router, repeat steps 1 to 3.
Set up wireless connection with
Windows Vista PC
What you need:
• A router that supports Vista PC
• Broadband Internet access.
(1) On the PhotoFrame:
1
In the main menu, select [Settings] >
[Installation] > [Network] > [Wireless]
> [Wireless Setup Guide], then press OK
to confi rm.
12 EN
WPS WPS
2
(2) On a Windows Vista PC:
1
2
3
Write down the PIN for the PhotoFrame:
_ _ _ _ _ _ _ _.
Ensure that the PC is connected to the
network.
Click [Start] > [Network].
Select [Add a Wireless Device].