What Is The Factory Settings - Panasonic HDC-TM700PC Service Manual

10.2. What Is The Factory Settings?

The factory settings clean up and/or refresh the following settings.
1. MENU, MODE, ADJUSTMENT VALUE.
2. SD card format.
3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)
4. Clear the mechanism lock information.
5. Clear the service mode information contents.
6. Close the lens cover
7. Initialize the VIERA Link Physical Address.
8. Confirm the data of Built-in memory is cleared. (only HDC-TM700)
• When recorded data in Built-in memory, "error display" is done
If "error display" is done, execute physical format according to the following procedure.
The setting position of factory settings:
Name
Mode dial
Setting position
Motion picture recording mode
45