Level Diagram - Kenwood TK-785 Service Manual

Receiver Section
–118.0dBm –121.0dBm
Transmitter Section
4.0mVrms 7.0mVrms 33mVrms
1. AG is set so that MIC input becomes 1.5kHz DEV. at 1kHz MOD.
2. Transmitting frequency : Center frequency.
TK-785
–109.0dBm –106.5dBm
–120.5dBm
370mVrms 430mVrms 460mVrms 80mVrms
TK-785
LEVEL DIAGRAM (K,E)
–88.0dBm –94.5dBm
–110.0dBm
62mVrms
SG input level for 12dB SINAD are obtained measured by
AF VTVM
connecting SG to each point via a 0.01µF capacitor.
AF level obtained when the AF output level is adjusted for 0.45V/4Ω with
the front panel AF VOL control. Measured with AF voltmeter connected
to the external speaker jack, receiving a –53dBm SSG signal modulated
at 1kHz, DEV. 1.5kHz.
1.5dBm 3.5dBm 18dBm
(X58-4712-71)
Wattmeter by 50Ω
89
30mVrms 820mVrms 820mVrms 16mVrms
10W (K)
25dBm 15W (E)
0.45Vrms
90