Installation; Installing The Webcam Software - Philips SPC900NC User Manual

EN
8

Installation

Installing the WebCam software

The software supplied only works on PC's / laptop's with the
operating systems Microsoft
Notes!
– Unplug all your USB devices (except USB keyboard and
USB mouse) before you start.
– Do not plug in your USB WebCam yet. Run the Installation CD-
ROM first.
®
– Have your Windows
– The SPC900NC WebCam is 'XP Plug & Play'. This means if you are
running Windows XP and you have installed Service Pack 2 and
the latest Microsoft Windows XP updates you don't need to install
the SPC900NC WebCam driver. Simply plug in the WebCam and
you can start using your SPC900NC WebCam.
1 Place the installation CD-ROM in your PC's / laptop's
CD-ROM / DVD drive.
> After a couple of seconds the the 'Language selection' screen
appears automatically.
Note!
If the 'Language selection' screen does not appear automatically,
®
open the Microsoft Windows
'Set-up.exe' icon in the CD-ROM directory.
2 Select your language and click on the 'OK' button.
> The following screen appears.
3 Select at least the 'SPC900NC WebCam Driver' and 'Philips
VLounge Advanced'.
Click on the 'Next' button.
® ®
Windows 98SE, ME, 2000 and XP.
CD-ROM at hand.
®
Explorer and double click on the