Picture Controls - Philips SPC900NC User Manual

EN
12
WebCam settings
4 Picture enhancer
Use the picture enhancement option if you would like to
increase the sharpness and the details of the image produced
by your SPC900NC WebCam.The picture enhancement
feature enables Philips patented Pixel Plus technology. By using
the level bar you can adjust the level of Pixel Plus added to
the live video of your WebCam.
Picture enhancement technology is powered by Philips Trimension.

Picture controls

5
6
7
8
9
0
!
@
#
$
%
^
&
*
5 Full automatic control: on/off
This full automatic control mode provides a very easy way to
get the best out of your Philips SPC900NC WebCam.
Or you can choose to have maximum manual control over
the WebCam settings by switching the full automatic control
mode off. Full automatic control 'on' is the preferred setting
for normal use.
Techniques active within full automatic control mode are:
– Automatic exposure control and automatic white balance
control, to provide the best video source signal possible;
– Automatic frame rate selection for improved WebCam
sensitivity in low light conditions.
6 Frame rate
You can use the scroll open menu to set the frame rate of
the video you wish to capture. E.g. 30 fps means that the
WebCam will capture video of 30 frames per second.