Related Manuals for Flymo Venturer Turbo 350
Summary of Contents for Flymo Venturer Turbo 350
- Page 1 Venturer Turbo 350 For all customer enquiries or for replacement parts, contact:- 01325 300303 www.flymo.com eop.customer.services@electrolux.co.uk...
-
Page 2: Carton Contents
Never use the mower unless the grass- box or guards provided by the manufacturer are in the correct position. Explanation of Symbols on the Venturer Turbo 350 Switch off! Remove plug from mains... - Page 3 IMPORTANT nected to the Terminal which is marked with the • Flymo connectors are suitable for use with 2 core letter 'L' or coloured RED. cable only. Under no circumstances should these It is important that the outer sheath is clamped connectors be used for earthed products.
- Page 4 Assembly Instructions - Handles Fitting the Lower Handles to your Lawnmower (A) Fitting the Upper Handle to the Lower Handle (B) 1. Pull the tie bar spindle (A1) to one side so that it is Insert the nut (B1) into the handle knob.(B2) (if applicable) flush with the hole in the side of the moulding.
-
Page 5: Starting And Stopping
Starting and Stopping To Start your Lawnmower 1. Connect female extension cable connector to the back of the switchbox. (G) Form loop in mains cable and push the loop through the slot as illustrated in picture (H) 3. To secure, position loop over the hook and pull the cable back through the slot as illustrated in picture (J). -
Page 6: Adjusting The Cutting Height
Adjusting the Cutting Height • REMEMBER all 4 wheels must be adjusted to • Switch off your the same height. lawnmower, wait 3. When cutting long grass the machine cutting height until the blade has should be set to its highest setting, i.e. the blade is stopped rotating and furthest away from the grass. -
Page 7: Fault Finding Hints
A network of specialist dealers can be found in your local iced at least every twelve months, more often in a Yellow Pages. To obtain service on your Flymo product professional application. simply telephone or visit your local Service Centre. Should 2. -
Page 8: Declaration Of Conformity
Declaration of Conformity I, the undersigned M. Bowden of I, the undersigned M. Bowden of I, the undersigned M. Bowden of Electrolux Outdoor Products, Aycliffe Electrolux Outdoor Products, Aycliffe Electrolux Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Industrial Park, NEWTON AYCLIFFE, Industrial Park, NEWTON AYCLIFFE, Co.