Stbserial - Encoded Media IPTV Receiver 250 Installer's Manual

STBSERIAL

Function Enter serial communications mode
Parameters <speed>-<bits>{5|6|7|8}-<parity>{O,E,N,M,S}-
<stopbits>{0|1|1.5|2}
[echo|hex|raw] [hw|sw|none] [cr|lf|crlf] [^escchar]
Response none
STBSERIAL 9600-8-N-1 echo
STBSERIAL 9600-8-O-1 hex

PLEASE NOTE!
When entering serial communications mode, any existing session in serial
communications mode will immediately be dropped (see also: Screen Control
Responses and Errors) but the IP connection to the device will remain open.
Page 16 of 21