Setting The Temperature And Steam Amount; Ironing Without Steam - Bosch Sensixx B22L Manual

Setting the
6
temperature and
steam amount
16*
1. Check the ironing instruction label on the
garment to determine the correct ironing
temperature.
2. Choose one of the following settings :
Temperature Steam setting
•
••
•••
3. The indicator light (17) will remain lit while the
iron is heating and go out as soon as the iron
has reached the selected temperature.
4. The "steam ready" indicator light (9) will light
up after several minutes, indicating that
steam is ready to be released.
5. Press the steam release button (15 or 16*) to
release steam.
Tips:
• Sort your garments out based on their
cleaning symbol labels, always starting with
clothes that have to be ironed at the lowest
temperatures.
• If you are not sure what the garment is made
of then begin ironing at a low temperature
and decide on the correct temperature by
ironing a small section not usually seen when
worn
15
Suitable for
Synthetics
Silk – Wool
Cotton – Linen
• At the beginning of each use, it is possible
that drops of water will be dispensed
alongside steam.
Therefore, it is advisable to try the iron on the
ironing board or a piece of cloth to start with.
"PulseSteam" function
This appliance has a special function for
tackling difficult creases.
The "PulseSteam" function helps soften
stubborn garments like jeans or linen faster.
When the steam release button is activated, the
steam generator will release three powerful
shots of steam so that the steam reaches even
deeper into the fabrics.
1. Set the setting selector (10) on "●●●"
2. Briefly press the steam shot button (16*) on
the top of the handle.
or (model dependent)
Press the steam release button (15) on the
bottom of the handle two times in quick
succession (double-click).
Remarks:
• It is possible to stop the shots of steam by
quickly pressing the steam button again.
• Some water drops may appear when you use
the "PulseSteam" function for the first time.
The water drops will disappear after you have
used the function for some time.
"IntelligentSteam" function
(Model dependent)
This system has intelligent steam control,
which, after releasing the steam release button
(15), provides a small amount of additional
steam.
The additional steam can always be stopped by
briefly pressing the steam release button once
again.
7

Ironing without steam

Begin ironing but without pressing the steam
release button (15 or 16*).
9
BOS CH