Download Print this page
Hanna FC 300 Instruction Manual

Hanna FC 300 Instruction Manual

Combination sodium electrode

Advertisement

Quick Links

Instruction Manual
FC 300
FC 300
FC 300
FC 300
FC 300
Combination Sodium
Electrode
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the FC 300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hanna FC 300

  • Page 1 Instruction Manual FC 300 FC 300 FC 300 FC 300 FC 300 Combination Sodium Electrode...
  • Page 2 Introduction Introduction water, soft drinks, beer, wine, and soils. The electrode The Hanna FC300 Sodium electrode is a glass combina- functions as a sensor or ionic conductor. The FC300 is a tion ion selective electrode designed for the measurement combination electrode that does not require a separate of sodium ions in aqueous solutions such as water, food, reference electrode to complete its electrolytic circuit.
  • Page 3 HI 7079 V. V. V. V. V. Equipment required Equipment required Equipment required: Equipment required Equipment required • Hanna FC300 combination electrode with HI 7079 fill ISA (500mL) HI4016-00 solution. HI7090L • Hanna 931100 portable waterproof Sodium meter Storage Solution (500mL) HI 4016-45 that reads out in units of g/L NaCl.
  • Page 4 ISA should be added to the sodium membrane exposing a fresh surface. Pour a both samples and standards immediately before tak- small quantity of Hanna HI 4016-46 conditioning solution ing measurements. into a plastic container. Place the sensing membrane (round •...
  • Page 5: Corrective Action

    These values are plotted on the semi-log paper and the X. X. X. X. X. Corrective action Corrective action Corrective action Corrective action Corrective action • Verify protective cap has been removed. points are connected to form a straight-line curve. When •...
  • Page 6 This method and protective cap with a few drops of storage solution over is preprogrammed in the Hanna HI 4222 pH/ISE/mV meter, the sodium sensitive membrane . Store electrode upright. which simplifies the method greatly.
  • Page 7: Warranty

    WARRANTY WARRANTY WARRANTY Hanna Instruments ISE series electrodes are warranted to be free of defects in material and workmanship for 6 months from date of purchase when used for their intended purpose and maintained according to instructions. If they fail to work when first used contact your dealer immediately.