Table of Contents
Advertisement
3.4.3.
3.4.3.1.
3.4.3.2.
20
COM600 series, version 4.1
IEC 61850 Proxy Server User's Manual
...
</LNClass>
...
</Dataset>
The data set identifies the data set to be created. LNClass and DO are used to determine
which LN/DOs should be added to the dataset. For example:
<DataSet name="StatNrml">
<LNClass name="GGIO">
</LNClass>
<LNClass name="PHAR">
</LNClass>
The StatNrml data set contains all Alm named SPS typed DOs under GGIO LNClass
and all str named ACD typed DOs under PHAR LNClass, and so on.
Additional signals can be added to each data set by dragging and dropping the DO object
to the Dataset Editor tool and applying changes.
The data sets for GOOSE have to be created manually.
To create data sets for GOOSE:
1. Create a Dataset object to the tree under the LN0 object.
2. Right-click the Dataset object and select Dataset Editor.
3. If you are creating a GOOSE data set, select the Enable daName for GOOSE
checkbox.
4. Drag and drop DO objects from the object tree to the Dataset Editor.
5. Click Apply.
Data reporting
About data reporting
Data changes are used as a trigger for reporting. This information is grouped using a
data set. The data set is the content basis for reporting. Reporting uses information reports
to transmit data. The data configured in a data set is transmitted in information reports.
Reporting is controlled by report control blocks.
Report control block
Report control describes the conditions for generating information reports based on
parameters set by configuration or by a client. Report Control Blocks control the proced-
ures that are required for reporting values of data from logical nodes to one client.
</DO>
<DO cdc="SPS" name="Alm"/>
<DO cdc="ACD" name="Str"/>
1MRS757275
Advertisement
Table of Contents
