Transferring/ Viewing Pictures - Philips KEY007 User Manual

Transferring / viewing pictures
CAUTION!
Windows 98 users only
WHEN CONNECTING THE CAMERA FOR THE VERY FIRST TIME TO CHARGE
UP/ TRANSFER FILES, MAKE SURE YOU ONLY DO SO AFTER YOU HAVE
INSERTED THE SUPPLIED CD-ROM INTO THE CD-ROM DRIVE FOR
INSTALLATION OF THE REQUIRED DRIVERS.
When you connect the camera to your computer via the USB port, your
computer operating system will recognize
Device (MSD).
KEY camera image files are stored in JPEG format as follows:
\DCIM\100PHILIPS\KEY7xxxx.jpg (for KEY 007/0078/0079 models)
\DCIM\100PHILIPS\KEY8xxxx.jpg (for KEY 008 models)
where xxxx is a JPEG file number (0001 to 9999).
Once you have the files to your computer, you
can use normal file operations to e.g. copy,
delete, rename your files.

Transferring/ viewing pictures

1 Detach the USB cover.
2 Connect the camera's USB socket to the
USB port of your computer.
➜ The
POWER
3 For details, please see the next pages of this chapter for PC and Mac users
respectively.
4 After viewing, unplug the camera from the USB port.
5 Replace the USB cover.
indicator blinks.
KEY camera as a USB Mass Storage
15