Taking Pictures - Philips ESP 2 User Manual

Taking Pictures

Taking Pictures Pages 28 - 31
q Turn on the power. The recording mode is
set.
Open the LCD monitor. Set the REC(ord) /PLAY
switch to the REC position.
w Set the image quality mode.
Set the PIC switch to F, N, or E.
e While viewing the LCD monitor, move the
camera toward the subject.
Briefly press the Release button and make sure
the message "READY TO SHOOT" appears.
r Press the Release button to take a picture.
Changing the Flash Mode
q Open the LCD monitor and slide the
REC(ord)/PLAY switch to the REC position.
w Press the Flash button and select Flash Off
( ), Forced Flash ( ) or Auto Flash (no sym-
bol).
e While viewing the LCD monitor, position the
camera to frame the subject, then press the
Release button to take the picture.
Using the Self Timer
q Open the LCD monitor and set the
REC(ord)/PLAY switch to REC.
w Press the Self Timer button. The Self Timer
( ) symbol will be displayed.
e Position the camera to frame the subject,
then press the Release button to take the
picture.
The Self Timer lights, the shutter will be re-
leased after approximately 10 seconds.
8
Pages 36 - 39
Page 44
DATE
DATE