Advertisement
M
ORE
P
IP hookup with a VCR and a
Digital Video Disc Player (or
similar device).
BEGIN
First connect the original cable
TV signal or Antenna signal to the
ANT IN jack on the back of the
VCR.
Connect the ANT OUT jack on
the rear of the VCR to the ANT "A"
input on the rear of the TV.
Connect the yellow Video Cable
from the VIDEO OUT jack on the
VCR to the VIDEO IN jack on the
TV (labeled VIDEO IN-2). Then,
connect the red and white Audio
Cables from the AUDIO OUT jacks
on the VCR to the AUDIO IN jacks
on the rear of the TV (labeled
AUDIO L & R/MONO IN-2).
Connect the yellow Video Cable
from the VIDEO OUT jack on the
Digital Video Disc Player to the
VIDEO IN jack on the TV (labeled
VIDEO IN-1). Then, connect the red
and white Audio Cables from the
AUDIO OUT jacks on the Digital
Video Disc Player to the AUDIO IN
jacks on the rear of the TV (labeled
AUDIO L & R/MONO IN-2).
Note: When selecting the PIP
SOURCE, the Digital Video Disc
Player will appear on the AV 1
channel, and the VCR will appear
on the AV 2 channel.
PIP (P
-I
ICTURE
2
ANT "A"
75
75 OHM
COAXIAL
CABLE
VIDEO
CABLE
(YELLOW)
ANTENNA
OUT
ANTENNA
IN
75 OHM
COAXIAL
CABLE
1
OR
-P
) C
N
ICTURE
REAR OF TV
3
S-VIDEO
VIDEO
L
AUDIO
R/MONO
IN-2
IN-1
OUT
AUDIO CABLES
(RED AND WHITE)
AUDIO CABLES
(RED AND WHITE)
OUT
OUT
AC-3(ANALOG OFF)
VIDEO
L
R
AUDIO
PCM(ANALOG ON)
AUDIO SELECTION
IN
IN
VCR
OUTSIDE UHF/VHF
ANTENNA OR
CABLE TV SIGNAL
ONNECTIONS
4
ATTENTION - TO AVOID DAMAGE
1. DO NOT CONNECT SURROUND SOUND SPEAKERS
TO A SEPARATE AMPLIFIER OR TO SPEAKERS
CONNECTED TO ANOTHER PRODUCT.
2. DO NOT CONNECT LEFT AND RIGHT SPEAKER
OUTPUT TOGETHER.
(YELLOW)
1
PCM/
VIDEO
AC-3 DIGITAL
2
R
L
ANALOG
AUDIO OUT
DVD (OR SIMILAR)
VIDEO
CABLE
S
VIDEO OUT
Advertisement
