5.8.3. Changing gear ratios
•
Lock the gearbox
Open closure plate on gear ratio housing
•
•
Remove circlip from the M32 x 1.25 nut
•
Remove anti-rotational safety
•
Loosen M32 x 1.25 nut
•
Completely remove gear ratio housing
•
Extract shift rod
•
Remove shift forks
•
Remove circlip from input shaft
Remove M 32x1.25 nut from pinion shaft
•
•
Remove gear ratios, bushes, needle-roller
bearings, hubs, dog-rings and spacer
bushes.
64