V-Chip Microsystems VT-CC1121-433M User Manual page 5

Circuit Interface
Circuit Circuit Circuit Interface Interface Interface
Note Note Note： Note
The pin sequence above are not the actual pin sequence refer pin description. SPI, I/O interface should
connect with the MCU's I/O pin in order to archive your functions. The circuit must be take ESD protect to
prevent damage module. Good RF performance determines on the module position, ground and antenna fixing.
Any question about the module please contact with the FAE engineer.
Configuration Configuration
Configuration Configuration Registers
The configuration of CC1121 can be done with software SmartRF Studio7. Complete descriptions of the registers
are given in the CC1121 datasheet. We can provide evaluation board and demo code to the customer to develop
and evaluate the module's capability.
Dimension Dimension
Dimension Dimension
COPYRIGHT @ 2012 Shenzhen V-CHIP MICROSYSTEMS Co. Ltd
VT-CC1121-APR-2012
Registers Registers
Registers
VT-CC1121-433M VT-CC1121-433M VT-CC1121-433M VT-CC1121-433M
VERSION: