Installation; Tv Set And Remote Control; Switching On - Philips Television Set & Remote Control Owner's Manual

2

Installation

Installing the TV set
æ
Place your TV set on a solid, stable surface (please
ensure this is strong enough). Do not place anything
on the TV set which might damage it (plants or heat
sources). For ventilation allow a space of at least 5cm
around the TV set.
Connecting the aerial
Â
Insert the aerial plug into the socket
of the set.
Connecting the mains
ê
Insert the mains plug into a wall socket
(220-240 V/50 Hz).
Remote control
®
Insert the 2 LR03-type batteries (supplied) making
sure they are the right way around.
In an effort to help protect the environment the batteries
supplied with this television do not contain mercury or nickel
cadmium. If a means of recycling batteries is available, please
use this (if in doubt, contact your dealer).

Switching on

†
Press the on/off key to switch on the television.
A green indicator comes on and the screen lights up.
If the indicator is red, press the
the remote control.
When the remote control is being used the indicator flashes
orange.
M
at the rear
key on