Table of Contents
Advertisement
Connect
Press the WPS button on your router/AP.
For more information about using WPS on your router,
please refer to the router manufacturer's user guide.
Immediately press the WPS button on your extender. The
should change from flashing to solid, showing that WPS connection is
successful.
LED
If you are connecting the extender to a dual-band router but only
2.4GHz or 5GHz LED is on, repeat step 1 and 2 again to connect the
other band.
Relocate
Plug the extender into an electrical outlet about halfway between your
router (Host Network) and the Wi-Fi dead zone.
Wait until the
closer to the router to achieve a good (or better) signal quality.
If the RE LED does not
change from flashing to
please refer to
Using your Web
Browser.
Some ISP gateways disable the WPS function by
default, if the WPS method fails, please refer to
your Web
Browser.
LED is lit with a solid blue. If not, relocate the extender
Connect the Extender to the Internet
solid,
Using
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RE350 AC1200 and is the answer not in the manual?