Conducting Automatic Patient Breath Tests - Bedfont Gastro+ Gastrolyzer User Manual

3. Press the patient profile slot again
patient using the keyboard provided.
4. Once you are happy with the name or ID, press
5. You have now successfully set-­‐up a patient profile; more can be set-­‐up by pressing
return to the patient profiles screen and repeating steps 2-­‐4.
6. Alternatively you can return to the home screen by pressing
Conducting Automatic Patient Breath Tests
Warning: Ensure batteries are full or device is connected to computer USB port (it will be powered
by the USB). If the device loses power during the automatic testing mode only saved results will
remain on the device and the protocol timings will be lost.
+
The Gastro ™ Gastrolyzer® allows you to set up automatic testing for up to 10 patients in one
session, which can be very time-­‐saving in a busy clinic. This can be done by following these steps:
1. Press on the main screen; this will take you to the patient database screen where you
can select patients that have been previously added. To add patients follows instructions in
'Adding a patient profile' section of this manual.
2. Here you can select up to 10 patients to test simply by pressing their name slot. Selected
patients will change from pink to green when selected, to deselect them press the name slot
again and it will return to pink.
3. Once the desired patients have been selected, press
progress to the protocol screen.
4. Here you are asked to select the protocol you wish to use for each patient; their name will
be shown at the top of the screen. Select the protocol by pressing the protocol name, for
example 'Lactose', when selected the protocol will change to green. To edit the protocol
timings please see 'Edit testing Protocols' section of this manual.
5. Press at the bottom of the screen to progress to the next patient.
6. When the final protocol has been selected and when selecting a patient during testing, you
will be presented by three options
at the top of the screen.
to enter the name for the
.
.
at the bottom of the screen to
for the first patient. Their name will be shown
to
4