Lacon L-EM1000 series Manual

Gigabit ethernet media converter

Advertisement

Quick Links

FCC Statement

The FCC (Federal Communications Commission) restricts the amount of radio
frequency emission and radiation coming from computer equipment.
The equipment introduced in this manual has been tested and found to comply with
the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user is required to correct the interference at his/her
own expense.
Any changes or modifications not expressly approved by the manufacture would
void the user's authority to operate the equipment.

Trademarks

Product names mentioned in this manual may be trademarks or registered
trademarks of those products.
All trademarks or brand names mentioned are properties of their respective
companies.

Preface

This manual describes how to install and use the Gigabit Ethernet Media
Converter. The Converter introduced here provides one channel media conversion
solution:
1000Base-T ↔ 1000Base-SX/LX (multi-mode/single-mode) with link-fault-pass-through function
1000Base-SX ↔ 1000Base-LX (multi-mode ↔ single-mode)
1000Base-LX ↔ 1000Base-LX (single-mode ↔ single-mode)
1000Base-T ↔ 1000Base-LX (WDM single-mode) with link-fault-pass-through function
1000Base-SX ↔ 1000Base-LX (multi-mode ↔ WDM single-mode)
1000Base-LX ↔ 1000Base-LX (WDM single-mode ↔ WDM single-mode)
The Gigabit Ethernet Media Converter fully complies with IEEE802.3ab 1000Base-
T and IEEE802.3z 1000Base-SX/LX Gigabit Ethernet standards.
In this manual, you will find:
Product overview
Features on the media converter
Illustrative LED functions
Installation instructions
Specifications
User's Manual
Gigabit Ethernet Media Converter
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L-EM1000 series and is the answer not in the manual?

Questions and answers

Summary of Contents for Lacon L-EM1000 series

  • Page 1: Fcc Statement

    Gigabit Ethernet Media Converter FCC Statement The FCC (Federal Communications Commission) restricts the amount of radio frequency emission and radiation coming from computer equipment. The equipment introduced in this manual has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 2: Table Of Contents

    Gigabit Ethernet Media Converter Table of Contents FCC S ..............1 TATEMENT ................1 RADEMARKS ...................1 REFACE ..............2 ABLE OF ONTENTS ................3 NTRODUCTION ...........3 RODUCT VERVIEW ...........4 RODUCT EATURES ..............5 ACKING ........5 HANNEL EDIA ONVERTER ............5 HYSICAL ORTS ............5 TATUS .................7 NSTALLATION .......7 ELECTING A ITE FOR THE...
  • Page 3: Introduction

    Gigabit Ethernet Media Converter Introduction The Gigabit Ethernet Media Converter provides one channel for media conversion between 1) 1000Base-T and 1000Base-SX/LX with link-fault-pass-through function or 2) 1000Base-SX/LX and 1000Base-LX. It can be used as a stand-alone device or with a standard 19” chassis as shown below. Product Overview Figure 1: 1000Base-T ↔...
  • Page 4: Product Features

    Gigabit Ethernet Media Converter Product Features One-channel media conversion between: 1000Base-T and 1000Base-SX/LX, 1000Base-SX/LX and 1000Base-LX Fiber media allows either: Multi-mode fiber, Single-mode fiber, or WDM Single-mode fiber Full wire-speed forwarding rate Front panel status LEDs Used as a stand-alone device or with a chassis Hot-swappable when used with a chassis Make sure to make a connection to the TX port before make a connection to the fiber port, a link condition will be sensed on the fiber...
  • Page 5: Packing List

    Gigabit Ethernet Media Converter Packing List When you unpack this product package, you will find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to your authorized reseller. The Media Converter User’s Manual AC to DC Power Adaptor One-Channel Media Converter Physical Ports...
  • Page 6 Gigabit Ethernet Media Converter LEDs State Indication Power Steady Power feeding in No power LNKC Steady TX port: A valid network connection established. LNKC stands for LINK/Copper No connection LNKF Steady FX port: A valid network connection established. LNKF stands for LINK/Fiber No connection FDX/COL Steady...
  • Page 7: Installation

    Gigabit Ethernet Media Converter Installation This chapter gives step-by-step installation instructions for the Converter. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: The ambient temperature should be between 32 and 113 degrees Fahrenheit (0 to 45 degrees Celsius).
  • Page 8: Specifications

    Gigabit Ethernet Media Converter Specifications Applicable Standards IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-SX/LX Fixed Ports 1000Base-T to 1000Base-SX/LX: 1 TX port, 1 FX port 1000Base-SX/LX to 1000Base-LX: 2 FX ports Speed 2000Mbps for full-duplex Forwarding rate 1,488,100pps for 1000Mbps LED Indicators 1000T↔...
  • Page 9: Ordering Information

    Gigabit Ethernet Media Converter Ordering Information 1000T ↔ 1000SX/LX Media Converter Gigabit Ethernet Cable / Connector Distance Port One 1000Base-T 4-pairs Cat. 5 / RJ-45 100m Port Two Options 1000Base-SX MMF of 850nm (62.5/125µm) / SC 220m 1000Base-SX MMF of 850nm (50/125µm) / SC 550m 1000Base-LX SMF of 1310nm (9 or 10/125µm) / SC...
  • Page 10 1000LX ↔ 1000LX Media Converter Gigabit Ethernet Cable / Connector Distance Port A 1000Base-LX SMF of 1310nm (9 or 10/125µm) / SC 10km 1000Base-LX SMF of 1310nm (9 or 10/125µm) / SC 20km 1000Base-LX SMF of 1550nm (9 or 10/125µm) / SC 50km 1000Base-LX WDM SMF of TX:1310nm / RX:1550nm (9 or 10/125µm) / SC...
  • Page 11: Appendix

    Gigabit Ethernet Media Converter Appendix Fiber budget Distance 1000Base-SX 7.5dBm 220m 850nm (62.5/125µm) 1000Base-SX 7.5dBm 550m 850nm (50/125µm 1310nm (9 or 10/125µm) 1000Base-LX 14dBm 10km 1000Base-LX 19dBm 20km 1310nm (9 or 10/125µm) 1000Base-LX 19dBm 50km 1550nm (9 or 10/125µm) 1000Base-LX 12dBm 20km TX:1310nm / RX:1550nm (9 or 10/125µm)

This manual is also suitable for:

Em2000 series

Table of Contents