Related Manuals for Builder Extreme 1000
Summary of Contents for Builder Extreme 1000
- Page 1 User Manual Extreme...
- Page 2 BUILDER V3.5...
- Page 3 When sending the Builder 3D printer back to our HQ please contact the helpdesk first. We need to diagnose the issues you experience first before taking any action. Contact helpdesk: helpdesk@builder3dprinters.com. If we are unable to solve the issue by phone or by using one of our YouTube videos we will inform you if the issue is a “warranty issue”.
-
Page 4: Safety And Compliance
Hazardous voltage. Risk of electric shock. Always unplug the printer before doing maintenance. DANGER Hazardous voltage. Risk of electric shock. Always unplug the printer before doing maintenance. DANGER Hazardous voltage. Risk of electric shock. Always unplug the printer before doing maintenance. BUILDER V3.5... - Page 5 Overview Specification printer Printing Printer Print technology: FDM / FFF Dimensions printer Extreme 1000: 1006x1016x (LxWxH): 1500 Extreme 2000: 1175x1016x 2300 Build volume (LxWxH): Extreme 1000: Weight: Extreme 1000: 220kg 700x700x820 mm Extreme 1500: 200kg Extreme 1500: Extreme 2000: 250kg...
- Page 6 Overview Outside dimensions Extreme 1000 1011,00 mm 1011,00 mm 420,00 mm 420,00 mm 335,00 mm 335,00 mm 420,00 mm 420,00 mm 1005,00 mm 1005,00 mm Extreme 2000 1011,00 mm 1011,00 mm 420,00 mm 400,00 mm 170,00 mm 1005,00 mm 1508,00 mm...
- Page 7 Overview Extreme 1000 Emergency stop LCD display Control Box Printhead Print frame Heated bed BUILDER V3.5...
- Page 8 Overview Extreme 2000 Emergency stop LCD display Control Box Printhead Print frame Heated bed BUILDER V3.5...
- Page 9 Overview Extreme 1500 Emergency stop LCD display Control Box Printhead Print frame Heated bed BUILDER V3.5...
- Page 10 Check all the three axis as shown. Be sure al When the printer is leveled correctly, place the the three axis are levelled if not use a wrench controlbox on top of the printer. to move up or down the machine feet to get the machine level BUILDER V3.5...
-
Page 11: Control Box
2. Light switch 3. LCD screen 4. LCD control button 5. SD card slot Extreme 1000 Control Box LCD Sceen The display provides information about the printer and object as shown in the image. 1. Line one tells you the hotend... -
Page 12: Lcd Screen
When the folded paper fits some what tightly, then you can move on to point 2 and 3. BUILDER V3.5... - Page 13 Do this with both filaments. WARNING Make sure when priting with the Dual-Feed both extruder holes are filled with a filament. Placing printhead Slide the printhead onto the printhead frame. BUILDER V3.5...
- Page 14 WARNING Nozzle 0.4 mm First layer 0.3 mm The extruder is hot when heating up the Nozzle 0.8 mm First layer 0.4 mm hotend for easy removement. Nozzle 1.2 mm First layer 0.6 mm BUILDER V3.5...
-
Page 15: Print From Sd Card
Bed: Change the bed temperature Fan speed: Change the fan speed Fan speed Flow: Change the flow of the material Flow Change filament: Pauses the print for changing filament Change filament Parking: Pauses the printer and move to his park position Parking BUILDER V3.5... - Page 16 Esteps/mm: Amount of steps for moving 1mm Esteps/mm Endstopabort Endstopabort: Off, Dont stop if hit endstop while printing Machine info Firmware: Check the firmware version of the printer Firmware Factory reset: settings to original system state Factory reset BUILDER V3.5...
- Page 17 Print platform Adhesion layer Adhesion layer The adhesion layer Builder recommends is woodglue/water mixed Preheat Heat up the machine before applying an adhesion layer to the bed. Select preheat in the menu to heat up the printhead and bed. Auto Home...