Installation Surface; Installation On A Base Or A Wooden Joist Floor; Installing The Appliance In A Kitchenette; Removing The Transport Bolts - Bosch WAN series Instruction Manual And Installation Instructions

Installation surface

The washing machine must be
Note:
aligned in a stable manner so that it
does not move around.
The installation surface must be firm
■
and level.
Soft floors/floor coverings are not
■
suitable.
Installation on a base or a
wooden joist floor
Caution!
Damage to the appliance
The washing machine may "wander"
and tip/topple from the base when
spinning.
The feet of the appliance must be
secured with holding brackets.
On wooden joist floors, install the
Note:
washing machine:
In a corner, if possible,
■
On a water-resistant wooden board
■
(min. 30 mm thick) which is screwed
tightly to the floor.
Installing the appliance in a
kitchenette
:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Do not remove the appliance covering
plate.
Notes
Recess width of 60 cm required.
■
Only install the washing machine
■
underneath a continuous worktop
that is securely connected to
adjacent cabinets.
Positioning and connecting

Removing the transport bolts

Caution!
Damage to the appliance
The machine is secured for
■
transportation using transport bolts.
If the transport bolts are not
removed, the machine may become
damaged when it is operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
bolts. Keep the bolts in a safe place.
To prevent transport damage from
■
occurring if the appliance is moved
at a later date, you must refit the
transport bolts before transporting
the appliance.
To avoid injury, take care when
Note:
handling these.
Use a spanner to loosen all fixing
1.
bolts until they turn freely.
All four parts will fall to the floor
2.
when you tip the machine.
Insert the cover caps which you will
3.
find in the bag containing the
documentation.
en
11