Mmc 40 C.o./Pbx Line - Samsung NX-308 Technical Manual

4Programming 1999.9.15 12:43 PM 페이지41
NX-SERIES
HYBRID KEY SYSTEM
MMC 40
This MMC is used to select the mode of the C.O. line. If the PBX mode is chosen, the
PBX access code can be recognized allowing more complete toll restrictions.
This mode is assigned on a per-trunk basis.
PROCEDURE
1. Press [TRANSFER] and dial 40
2. Using [VOLUME (+) or (-)], select the trunk number
(e.g. 702)
To select all trunk lines, press [VOLUME (-)] first
3. Pressing [MUTE] or [MESSAGE], you can set the
trunk to C.O. or PBX line
OR
Using KEYPAD, dial
1 for C.O line
or 2 for PBX line
4. Press [TRANSFER] to save and exit
DEFAULT DATA
C.O. LINE
RELATED MMC
NONE
PROGRAMMING SECTION
C.O./PBX LINE
LCD DISPLAY