4Programming 1999.9.15 12:43 PM 페이지39
NX-SERIES
HYBRID KEY SYSTEM
MMC 38
This MMC is used to define the dial type of phone connected to each SLT port.
Keysets are not affected by this MMC.
There are two dialing types:
DIALING TYPES
1
DTMF
2
PULSE
PROCEDURE
1. Press [TRANSFER] and dial 38
Display shows the SLT port (e.g. 217)
If there is no SLT port, display shows
2. Using [VOLUME (-) or (+)], select the SLT port number
To select all stations, press [VOLUME (-)] first
3. Press [MUTE] or [MESSAGE] to select the SLT type.
OR
Using KEYPAD, dial
1 for DTMF
or 2 for PULSE
4. Press [TRANSFER] to save and exit
DEFAULT DATA
DTMF
RELATED MMC
NONE
Dual Tone Multi-Frequency (Touch Tone)
Dial Pulse (rotary)
PROGRAMMING SECTION
SLT DIALING TYPE
LCD DISPLAY