Canon WFT-E8 Instruction Manual page 86

Basic Linked Shooting
Preparing the Master Camera
Set up the master camera by operating the camera to use as the
master.
Connecting the Cameras
Operate the slave cameras and master camera to connect them.
86
Select [Master].
7
Perform steps 1 to 5 on page 84 for

the master camera, then select
[Master].
Select [OK] and press <0> to go to

the next screen.
Select [Auto connect].
8
Select [OK] and press <0> to go to

the next screen.
To set manually, see page 91.

On the slave cameras, select
9
[OK].
On all slave cameras, select [OK].

On the master camera's LCD monitor,

the number of slave cameras
detected is displayed.
On the master camera, select
10
[OK].
Check the number of slave cameras,

then select [OK].