Canon WFT-E8 Instruction Manual page 126

Responding to Error Messages
What to check on the network as a whole
Does your network include a router or similar device that

serves as a gateway?
If applicable, ask your network administrator for the network

gateway address and enter it on the transmitter (p.138, 144).
 Make sure that the gateway address setting is correctly entered on
all network devices, including the transmitter.
42: FTP server rejected connection
What to check on the FTP server
Is the FTP server configured to restrict access to only some IP

addresses?
Change the FTP server settings to allow access from the [IP

address] configured on the transmitter in the TCP/IP settings.
43: Cannot connect to FTP server. Error code received
from server.
What to check on the FTP server
Have you exceeded the maximum number of FTP server

connections?
Disconnect some network devices from the FTP server or increase

the maximum number of connections in the FTP server settings.
44: Cannot disconnect FTP server. Error code received
from server.
This error occurs if the transmitter fails to disconnect from

the FTP server for some reason.
Turn off and on the FTP server and camera.

126