Cleaning Your Hard Floors - Bissell powerfresh deluxe 1806 series User Manual

Operations: Cleaning Your Hard Floors
NOTE: Before you clean, thoroughly sweep or vacuum floor prior to cleaning
with the Powerfresh® Deluxe Steam Mop.
YOUR STEAM MOP IS DESIGNED TO CLEAN HARD FLOORING SUCH AS CERAMIC TILE,
VINYL, LAMINATE, MARBLE, STONE AND SEALED HARDWOOD FLOORS. USE OF YOUR
STEAM MOP ON WAXED OR SOME UNWAXED FLOORS MAY RESULT IN A DIMINISHED
GLOSSINESS. THE STEAM MOP IS NOT FOR USE ON UNSEALED FLOORS. FOR BEST
RESULTS, TEST IN AN INCONSPICUOUS AREA AND CHECK THE CARE INSTRUCTIONS
FROM YOUR FLOORING MANUFACTURER.
1
Plug the machine into a
properly grounded outlet.
3
Step on the back of the foot
to recline the body of the
machine to begin cleaning.
NOTE: When removing the SpotBoost Brush
your body as the bottom of the brush will release steam.
5
x3
8
www.BISSELL.com
2
To start cleaning your hard floors, turn the machine ON
by pressing the POWER button. Once the blinking light
turns solid, select the appropriate steam level.
4
For overly challenging and stuck-on messes, step on
the release pedal located on the back of the machine
and lift up to use the SpotBoost Brush™ (see page 7).
To be sure to sanitize
an area of your floor,
use the microfiber
cloth pads and
slowly and evenly
stroke your steam
mop back and forth
at least three times
over the area using
continuous steam.
For best results,
remove the pad and
wash after use.
, make sure to lift it away from
™
6
When done cleaning, turn off the
machine by pressing the POWER
button and unplugging the unit.