Advertisement
Available languages
Available languages
Electromagnetic fields (EMF)
-
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
General
-
The appliance is suitable for mains voltages ranging from
100 to 240 volts.
-
The supply unit transforms 100-240 volts to a safe low
voltage of less than 24 volts.
Display
Battery status indications
When the battery is almost empty, the bottom light flashes
orange (Fig. 3).
When the appliance is charging, first the bottom charging light
flashes white, then the second charging light (Fig. 4), and so
on. When the battery is fully charged, all lights light up white
continuously (Fig. 5).
Note: The lights switch off automatically after 30 minutes.
Remaining battery capacity
The battery charge is indicated by the lights of the battery
charge indicator that light up continuously.
Hair length indications
The selected hair length setting will show on the digital display
when you select the desired length setting with the zoom wheel
(Fig. 6).
Charging
Charging takes approx. 1 hour. Charge the appliance before you
use it for the first time and when the display indicates that the
battery is almost empty.
1
Make sure the appliance is switched off.
2
Put the adapter in the wall socket and put the small plug in
the appliance (Fig. 7).
3
After charging, remove the adapter from the wall socket and
pull the small plug out of the appliance.
When the appliance is fully charged, it has a cordless operating
time of up to 80 minutes.
Using the appliance
Note: This appliance can be used without cord or directly from
the power outlet.
You can use this appliance for a stubble and a short beard.
This appliance has an integrated vacuum system that catches
cut beard hair for a less mess trimming experience.
The vacuum system is activated automatically as soon as you
switch on the appliance.
Note: Switch off and clean the appliance after each use.
Switching the appliance on and off
Press the on/off button once to switch the appliance on or off
(Fig. 8).
Trimming without comb
-
You can use the appliance without beard and stubble comb
to trim hair close to the skin or to contour the neckline and
sideburns. To trim hair close to the skin, place the flat side
of the trimming head against your skin and make strokes in
the desired direction (Fig. 9).
-
For contouring hold the trimming head perpendicular to the
skin and move the trimming head upwards or downwards
with gentle pressure (Fig. 10).
-
You can use the precision trimmer to create fine lines and
contours around your facial style, close to the skin
(Fig. 11). Simply pull the cutting element straight off (Fig. 12)
and insert the precision trimmer (Fig. 13).
Trimming with comb
Note: When you trim for the first time, start at the highest length
setting to familiarise yourself with the appliance.
-
You can use the beard and stubble comb attached to the
cutting element to groom your beard and moustache in
your preferred style. For the beard and stubble comb, you
can turn the zoom wheel to choose from 20 length settings
ranging from 0.5mm to 10mm in steps of 0.5mm (Fig. 6).
-
You can use the precision trimmer with a detail comb
attached for precision trimming of your sideburns,
moustache or beard (Fig. 14). This appliance comes with
2 different detail combs: 5mm (L) and 3mm (M).
1
Attach the detail comb (Fig. 15) or the beard and stubble
comb onto the appliance (Fig. 16).
2
Switch on the appliance.
3
To trim most effectively, move the appliance against the hair
growth direction (Fig. 17). Make sure that the surface of the
comb always stays in contact with the skin.
Cleaning and maintenance
Cleaning the appliance
Note: Only the cutting element and the comb can be cleaned
with water.
We advise you to empty the hair-collection chamber after each
trimming session. When you trim long, dense beards,
it may also be necessary to empty the hair-collection chamber
during the trimming session in order to maintain optimal suction
performance.
1
Switch off the appliance and disconnect it from the power
outlet.
2
Wipe the housing of the appliance with a dry cloth.
3
Remove the comb (Fig. 18) and clean it with the cleaning
brush and/or rinse it under the tap (Fig. 19).
4
Remove the cutting element and clean it under the tap
(Fig. 20). Shake off excess water and leave to dry completely.
Caution: Never dry the cutting element with a towel or tissue,
as this may damage the trimming teeth.
5
Shake and/or brush out the hairs that have collected in the
hair chamber (Fig. 21).
6
After cleaning, reattach the cutting element
(Fig. 22) and comb (Fig. 16) to the appliance.
Recycling
-
This symbol means that this product shall not be disposed
of with normal household waste (2012/19/EU) (Fig. 23).
-
This symbol means that this product contains a built-in
rechargeable battery which shall not be disposed of with
normal household waste (Fig. 24) (2006/66/EC).
We strongly advise you to take your product to an official
collection point or a Philips service centre to have a
professional remove the rechargeable battery.
-
Follow your country's rules for the separate collection
of electrical and electronic products and rechargeable
batteries. Correct disposal helps prevent negative
consequences for the environment and human health.
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate worldwide
guarantee leaflet.
FRANÇAIS
Description générale (Fig. 1)
1
Élément de coupe
2
Système d'aspiration
3
Hauteurs de coupe
4
Molette de réglage
5
Bouton marche/arrêt
6
Témoin d'état de la batterie
7
Trousse
8
Brossette de nettoyage
9
Petite fiche
10 Bloc d'alimentation (adaptateur)
11
Tondeuse de précision
12 Sabot de détail 5 mm (L)
13 Sabot de détail 3 mm (M)
14 Sabot pour barbe et barbe de 3 jours
Informations de sécurité
importantes
- Lisez attentivement ces
informations importantes
avant d'utiliser l'appareil et
ses accessoires et conservez-
les pour un usage ultérieur.
Les accessoires fournis
peuvent varier selon les
différents produits.
Danger
- Conserver le bloc
d'alimentation au sec (Fig. 2).
Avertissement
- Le bloc d'alimentation
contient un transformateur.
N'essayez pas de remplacer
la fiche de Le bloc
d'alimentation afin d'éviter
tout accident.
- Chargez toujours l'appareil à
l'aide du bloc d'alimentation
fourni (HQ8505).
- Cet appareil peut être
utilisé par des enfants
âgés de 8 ans ou plus, des
personnes dont les capacités
physiques, sensorielles
ou intellectuelles sont
réduites ou des personnes
manquant d'expérience et de
connaissances,
à condition que ces enfants
ou personnes soient sous
surveillance ou qu'ils aient
reçu des instructions quant
à l'utilisation sécurisée de
l'appareil et qu'ils aient pris
connaissance des dangers
encourus. Les enfants ne
doivent pas jouer avec
l'appareil. Le nettoyage et
l'entretien ne doivent pas être
effectués par des enfants sans
surveillance.
- Vérifiez toujours l'appareil
avant utilisation.
Afin d'éviter tout accident,
n'utilisez pas l'appareil s'il
est endommagé. Remplacez
toujours une pièce
endommagée par une pièce
du même type.
- N'ouvrez pas l'appareil
pour remplacer la batterie
rechargeable.
Attention
- Cet appareil n'est pas lavable
à l'eau. Ne plongez jamais
l'appareil dans l'eau et ne le
rincez pas sous l'eau (Fig. 2).
- N'utilisez pas cet appareil à
d'autres fins que celles pour
lesquelles il a été conçu (voir
le mode d'emploi).
- Pour des raisons d'hygiène,
l'appareil doit être utilisé par
une seule personne.
- N'utilisez pas le bloc
d'alimentation dans ou à
proximité de prises murales
qui contiennent ou ont
contenu un assainisseur d'air
électrique, afin d'éviter que le
bloc d'alimentation ne subisse
des dommages irréversibles.
Advertisement
