Download Print this page

DeWalt DW060 User Manual page 41

Tile laser
Hide thumbs Also See for DW060:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 37
• Use only the correct size of batteries. When replacing, do not mix old
batteries with new ones.
• Under extreme conditions, battery leakage may occur. When you notice
liquid leaking out, proceed as follows:
- Carefully wipe the liquid off using a cloth. Avoid skin or eye contact.
Do not swallow.
- In case of skin or eye contact, rinse the liquid off with clean flowing
water for at least 10 minutes and contact a doctor.
Fire hazard! Avoid short-circuiting the contacts of a removed
battery.
Additional safety instructions for lasers
• This laser complies with class 2 according to EN 60825-1:1994+A11.
Do not replace a laser diode with a different type. If damaged, have the
laser repaired by an authorised repair agent.
• Do not use the laser for any purpose other than projecting laser lines.
An exposure of the eye to the beam of a class 2 laser is considered safe for
a maximum of 0.25 seconds. Eyelid reflexes will normally provide adequate
protection. At distances over 1 m, the laser complies with class 1 and thus
is considered completely safe.
• Never look into the laser beam directly and intentionally.
• Do not use optical tools to view the laser beam.
• Do not set up the tool at a position where the laser beam can cross any
person at head height.
• Do not let children come in contact with the laser.
Labels on tool
The following pictograph is shown on the tool:
Read the instruction manual before use
E N G L I S H
41

Hide quick links:

Advertisement

loading