Table of Contents
Advertisement
or may not be required for RGB connections. Use the AV4
L(eft) and R(ight) AUDIO sockets for sound connections.
See the handbook for the digital equipment you are
connecting.
AV5
– use to connect digital equipment with a 1080i/480p (60Hz)
or 576p (50Hz) signal output, such as digital set-top
boxes or DVD players. The AV5 socket accepts a DB15
connector. Note, however, that adaptors can also be used
to connect from component video output to this DB15
socket. Use the AV5 L(eft) and R(ight) sockets for sound
connections.
See the handbook for the digital equipment you are
connecting.
AV4 and AV5 Digital High-definition Inputs
When you have digital equipment with 1080i or 480p signal
output (60Hz) or 576p signal output (50Hz), connect it to the
AV4 or AV5 inputs on your TV. Examples of such equipment are
digital set-top boxes and progressive-scan DVD players.
Connecting to AV4
Connect digital equipment with component video output (usually
labeled Y-Pb-Pr) or with RGB output (phono-type connectors) to
the AV4 inputs for video and audio left and right. Also connect to
the H and V SYNC inputs on the TV if required for your digital
equipment.
Note: The AV4 sockets are compatible with some digital equipment
having RGB outputs with "sync on green" or RGB with "separate H
and V sync." Output standards for digital equipment, however, may
vary by manufacturer. No industry standards have been established
for HD television RGB signal systems, timing, synchronization, and
signal strengths. If the digital equipment you want to connect to your
TV offers both component video and RGB outputs, component video
is the suggested connection to use. See the handbook for the digital
equipment.
Connecting to AV5
Connect digital equipment with RGB or Y-Pb-Pr output to the
AV5 inputs for video and audio left and right. A DB15 cable or
adaptor cable with a DB15 connector is required.
Note: The AV5 input cannot be used to connect a computer or any
other VGA device.
Notes regarding connecting to either AV4 or AV5:
• For connections to either AV4 or AV5, be sure the TV's colour-
space setting matches the output (Y-Pb-Pr or RGB) of the digital
equipment you have connected to the AV4 or AV5 inputs. See
instructions for setting the TV's colour space on page 22.
• See the handbook for the high-definition equipment.
• If you notice scrolling images, wrong colours or no colour, no picture
or even combinations of these on your screen, check to see if the
connections have been done properly.
High-definition Inputs – Video Synchronizing Reference
Input
Video Description
480p (60Hz)
AV4, AV5
1080i (60Hz)
576p (50Hz)
REAR OF TV
23
Accepts Video Sync
according to:
EIA/CEA-770.2-C
EIA/CEA-770.3-C
ITU-R BT.1358
Advertisement
Table of Contents
