Table of Contents
Advertisement
NATURAL MOTION
Press this button repeatedly to select Off,
On (Progressive) or On (1050i lines).
See TV menu, Picture menu, p. 12.
DNR Digital Noise Reduction
Press this button repeatedly to select Off,
Minimum, Medium or Maximum.
See TV menu, Picture menu, p. 13.
VCR Prog (Only functional in VCR mode.)
Many VCRs have an automatic programming
function. If your VCR has this function, the
universal code set will assign it to this
Press + or - to adjust the volume.
Temporarily interrupt the sound or restore
CH Channel selection
To browse through the TV channels or
z
Surf
With this feature you can easily switch between different TV channels/sources that
currently interest you.
In the menu system, you can set surf to two- or nine-channel.(See Settings,
General Surf, p. 22.)
Press this button to select the previously viewed TV channel or source in case of a
Two channel surf, or to select the surf ring in case of a Nine channel surf.
In case of a Nine channel surf, a list appears at the right side of the screen. On top,
the most recently added.The puck is on the channel number currently viewed.
Press the z button to turn to the next channel in the list or press cursor
up/down to immediately select the desired TV channel of the list.
To add a new channel or source: tune to the channel or source you wish to add.
Press the z button. Press the cursor right to add.
If there are already nine channels/sources in the list, the one at the bottom of the
list will be removed.
To remove a channel or source: select the channel number you want to remove.
Press the z button. Press the cursor right to remove.
Press the OK button or wait for the time out to dismiss the Surf display.
Use of the remote control
10
button.
VOL Volume
¬
Mute
it.
sources stored.
SOURCE
SELECT
POWER
TV
CBL
VCR
AMP
HD
SAT
DVD
CD
q
l
Q
NATURAL
INFO +
DNR VCR Prog EXIT
MOTION
a
a
a
a
a
S
CC
OK
MENU
Ï
¬
VOL
CH
1
2
3
4
5
6
7
8
9
SURF
0
ACTIVE
SOUND
CONTROL
PICTURE
M
h
a
fi
b
c
ZOOM
EXIT
Press this button to exit the menus provided
by universal devices like VCR, SAT, DVD,...
INFO + Display information
Press this button to display (when available)
information about the current channel and
program or source.
The information display is divided in two
zones.
The upper zone may present the local time
and information on the current program:
number, name, video and audio formats of the
incoming signal, CC availability, availability of
alternate or secondary audio programs (a
plus sign appears if you have more than one
choice), ratings and
11
WPIX
12:47
program title if
available.
4:3
Stereo
(cc)
MAIN+
The lower zone
TV-PG-DLSV
presents
information about
Kids with Guns
the currently
Widescreen
selected settings:
Surround
display format,
05:22
sound mode and (if
on) the Sleep Timer icon and the minutes
remaining.
Backlighting button
Press this button on the right side of the
remote control.The backlighting of the
, ¬ and the digit buttons
buttons
VOL, CH
stays on for 5 seconds after pressing the
button.
Advertisement
Table of Contents
