Advertisement
A sticker is affi xed to the glass of the clock when you purchase it. Be sure to remove the sticker before using
the clock.
Depending on the clock model, the confi guration of your clock may differ somewhat from that shown in the
illustration.
Alarm Off
Current time
PM indicator
(Hour, minutes, seconds)
Day of the week
Current Humidity
DATE (month - day)
Current Temperature
GENERAL GUIDE
1 SNOOZE/LIGHT button
Press this button to illuminate the display for about fi ve seconds.
Pressing this button while the alarm is sounding stops the alarm.
2 + (UP) / – (DOWN) buttons
Use these buttons to change the alarm time or the setting that is fl ashing on the display.
3 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
4 DEMO button
Press this button to test the alarm sound.
5 °C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
6 RESET button
Press this button to reset the clock after replacing its batteries.
7 SET button
Use this button when setting the current time.
8 MAX/MIN button
Press this button to display the high and low temperature and humidity values.
Operation Guide DQ-982N
Snooze Alarm On
Snooze on indicator
Alarm time
Alarm on indicator
USING THE CLOCK
1. Press the SET button (7) to cycle through the setting screens as shown below.
Normal Timekeeping Screen
Contrast Setting Screen
12-hour/24-hour Setting Screen
Year Setting Screen
Month and Day Setting Screen
Time Setting Screen
2
Advertisement
