Installation; Unpacking; Mounting; Rear Support Bracket - Zenith 10K4 User Manual

5 INSTALLATION

5.1 Unpacking

Carefully open the shipping carton and check for any
noticeable damage. The 10K4 power amplifier is
tested and inspected before leaving the factory and
should arrive in perfect condition. If any damage is
discovered, please notify the shipping company
immediately. Only the consignee may institute a
claim with the carrier for damage incurred during
shipping. Save the carton and packing materials.
Should you ever need to ship the amplifier,
always use the original packaging materials.

5.2 Mounting

Free airflow from front-to -rear of the amplifier must
be possible. Therefore, no doors or rack-lids should
be mounted in front of or behind the amplifiers.
Amplifiers may be stacked directly on top of each
other. There is no need for spacing in between units,
though this might enable more convenient
installation of cabling on the rear panel.
It is recommended that rear supports be mounted
for maximum long-term stability. Rear support
brackets are included.

5.2.1 Rear support bracket

2 rear support brackets are included with the
amplifier.
Alternative 1:
Use screw and washer for fixed installation.
Alternative 2:
Use two screws and washer for fixed installation.
Zenith 10K4 Amplifier Manual 8