Changing The Amplifier Hot Swap Modules - Zenith 10K4 User Manual

6.3 Changing the amplifier hot swap modules

Push in:
Move the plug in/out bar to the handle (right side), and then push into the bottom of slot directly. It's only can be
used after an indicative sound from the auto-lock switch that means the module is positioned. (It is very important
to make sure that the module has been pushed in completely.)
Pull out:
When need to pull out the module, stirring the plug in/out bar to the handle (right side), the module will draw out
from the position automatically, and then pull out the module easily and simple.
- Change modules one at a time. Do not repeatedly insert/remove the modules.
Zenith 10K4 Amplifier Manual 14