Remote Control Keys - Philips 29PT9007/58 User Manual

Remote control keys

Standby
Lets you place the TV set in
standby.To turn on the TV, press
@ # 0
P or
Pressing the key for 3 seconds allows
you to place video recorders equipped
with the EasyLink function in standby
Select peripherals (p.10)
Press several times to select the
required EXT connector.
Mode selector (p. 11)
Teletext (p. 9)
or video recorder keys (p.11)
NexTView Guide (p. 7)
Smart picture and sound
Used to access a series of predefined
picture and sound settings.
The Personal position relates to
settings selected from the menus.
To call up or exit the menus.
Cursor
These 4 keys are used to move
around the menus.The
confirms your choice.
Volume
To adjust the sound level
To mute or restore the sound.
Freeze the picture
Sound mode
Used to force programmes in Stereo
and Nicam Stereo to Mono or, for
bilingual programmes, to choose
between Dual I or Dual II.
The Nicam available indication is
displayed for Nicam programmes
when in the forced Mono position.
Screen information
To display the programme number
and name, sound mode, the picture
format and the time remaining on
the sleeptimer. Press the key for 5
seconds to activate/disable the
display of all information when
changing programmes.
* "Dolby" and the double-D symbols
Manufactured under license of Dolby Laboratories Licensing Corporation.
9
to .
MODE
VCR
AUX
· ¢
Π%
SMART
-
Menu
MENU
u
key
+
VOL
-
Mute
ù
1
4
7
Ë
£
are trademarks of the Dolby Laboratories Licensing Corporation.
†
To activate / deactivate the surround
sound effect. In stereo, this gives the
impression that the speakers are
further apart. For models equipped
with Virtual Dolby Surround*, you
can experience Dolby Surround Pro
Logic sound effects. In mono, a
stereo spatial effect is simulated.
.
Time display
To display or remove the time
∫
Y
Ÿ transmitted by the teletext of
programme n°1.
Ê Æ
The time function is not available
when subtitles are activated (p. 6).
Teletext (p. 9)
¤
unused key.
ACTIVE SMART
ª
Active Control (according to the version)
With this function turned on, the
CONTROL
television set optimises the quality of
OK
the picture depending on the signal
received.The definition and noise
reduction are controlled automatically.
In order to view the parameters, press the
+
up/down cursor while Active Control is
MUTE
displayed on the screen. Press the cursor
[
P
-
again to clear it (it cannot be adjusted).
Programme selection
›
∏ To access the next or previous TV
channels from the list of Favourite
ZOOM
Programmes (see p. 5).
2 3
Enlarge a teletext page (p. 9)
5 6
16:9 Format (according to the version)
To compress a picture vertically.
8 9
Previous programme
Á
0
To return to the previous
programme.
Number keys
Direct access to the programmes.
For a 2 digit programme, enter the
2nd digit before the dash
disappears.
Surround Sound
3