Supra SR Owner's Manual page 62

If additional time is required to empty the Ballast tanks, add percentage to the [Ballast Drain
Time Adder] to increase the drain time. Or set the [Ballast Drain Time Adder] to 0 percent
for no additional time.
If enabled, the [Supra Launch System] will assist in getting the craft to plane quicker when
the Swell is turned off.
The [Ballast Calibration] normally is not changed.
The [Ballast Calibration] function recalibrates the ballast level displayed to read Full (100
percent) or Empty (0 percent). The Ballast display levels are based on time to level
calculations.
For example: The driver has filled the ballasts to Full and then installed a new version of
software. This new version of software would default the Ballast Levels back to Empty (0
percent). Since the driver knows that the boat has Full ballasts, the driver can use this
calibration feature to set the display level to Full (100 percent).
Touch [Save] to save changes.
Audio Settings
On the main Menu screen, touch [Audio Settings] to access the Audio Settings screen. This
screen displays auto volume intensity, notifications, wireless remote pairing, Bluetooth
settings, audio profiles and audio firmware settings.
2016-07-26 1611937
61 —
© 2016 Skier's Choice, Inc.
-38-